奥门大金沙加料需要注意什么？-江苏奥门大金沙设备有限企业

资讯中心News

咨询热线：0523-84622588

电话：0523-84622588

传真：0523-84622290

销售部-15061030877、13301428345、0523-84622260

凌海炼-18115293118（修补材料部）

张小美-15061032118（修补业务部）

办公地址：江苏省靖江市城南经济开发区永益路一号

生产地址：江苏省靖江市城南经济开发区永益路一号

当前位置：首页 » 资讯中心 > 资讯动态

奥门大金沙加料需要注意什么？

发布时间：2020/11/30 10:04:12 点击：

奥门大金沙加料需要注意什么？
1.奥门大金沙加料方法先容；
2.一次性定量投料。
3.进料的连续流量控制。
4.间歇加料，主要考虑一些反应的触发点，一定温度或一定浓度，放热量一般较大。
5.根据材料特性、设备配置和布局以及工艺要求，应易于确定抽真空方法。

第二，为了在设备内部产生更好的反应效果，大家必须注意:
1.必须防止金属等硬物掉入容器内，损伤内表面；
2.加料时严禁携带物料中的杂物，严禁将较大的硬质物料直接加入反应釜中；
3.给反应釜加料时，降低物料与釜壁的温差，避免加热冷釜中的物料或在热釜中加入冷料，以免温差过大而产生内应力，影响设备的使用寿命；
4.尽可能避免在空罐中加热材料或在热罐中加入冷材料。过大的温差冲击对水壶的性能有一定的影响。

第三，给反应釜加料时，一定要注意物料的清洁度，及时清理杂质，注意控制温度。

What should I pay attention to when feeding stainless steel reactor?
1. Introduction to the feeding method of stainless steel reactor;
1. One-time quantitative feeding.
2. Continuous flow control of the feed.
3. Intermittent feeding, mainly considering the trigger points of some reactions, a certain temperature or a certain concentration, the heat release is generally large.
4. According to material characteristics, equipment configuration and layout, and process requirements, it should be easy to determine the vacuum method.

Second, in order to produce a better response effect inside the equipment, we must pay attention to:
1. It is necessary to prevent hard objects such as metal from falling into the container and damaging the inner surface;
2. It is strictly forbidden to carry sundries in the materials when feeding, and it is strictly forbidden to directly add larger hard materials into the reactor;
3. When feeding the reaction kettle, reduce the temperature difference between the material and the wall of the kettle, avoid heating the material in the cold kettle or adding cold material to the hot kettle, so as to avoid excessive temperature difference and internal stress, affecting the service life of the equipment;
4. Avoid heating materials in empty tanks or adding cold materials in hot tanks as much as possible. Excessive temperature impact has a certain impact on the performance of the kettle.

Third, when feeding the reactor, we must pay attention to the cleanliness of the materials, clean up impurities in time, and control the temperature.

上一篇：反应釜的结构优缺点 2020/12/2
下一篇：浅谈搪瓷反应釜的维护 2018/9/18

奥门大金沙-首页

专业高效产品优良，质量可靠

资讯动态

行业动态

常见问题

联系大家

奥门大金沙加料需要注意什么？

奥门大金沙|澳门js娱乐